MULTI-BAND & MULTI-ORBIT ANTENNAS & TERMINALS

2.2m MEO-GEO Ultralight FlyAway Antenna

The AvL 2.2m Ultralight FlyAway Antenna is a multi-band motorized antenna with auto-acquire for GEO communications and an upgrade for MEO operation. The antenna is configured with split elevation and azimuth positioners for lighter weight and smaller pack-up.

AvL’s 2.2m Ultralight FlyAway Antenna is part of the Lite Coms Lite Sat® 2.2A VSAT terminal, which has been certified for:

  • ARSTRAT including Low PIM for X-band
  • MIL-STD-810 Environmental
  • MIL-STD-1452 Two-Person Lift
  • SES First Generation O3b MEO
KEY FEATURES
  • 13-piece carbon reflector
  • Assembly in 15 minutes with two people
  • Tri-band: X-, Ku- and Ka-band
  • RF band auto-sensing and will sense a change in RF kit and auto update settings to the new band
Reflector constructionSegmented, carbon fiber 
Az/El drivesSplit elevation and azimuth positioners for lighter weight and smaller packup
Packed configurationPacks into 5 Lite Coms cases, all weigh <112 lbs
Set-up time15 minutes with two people

Wind – survival, anchored

Up to 60 mph (96 kph) in 90º elevation stowed position

Wind – operational, anchored

Up to 40 mph (64 kph)

Transport configuration

MIL-STD-810 for temp, humidity, altitude, salt spray, transport shock and vibration
Operational configurationMIL-STD-810 for temp, humidity, altitude, salt spray, transport shock and vibration
 X-band ReceiveX-band TransmitKa-band ReceiveKa-band Transmit
Frequency Range (GHz)7.25 – 7.757.9 – 8.420.2 – 21.230.0 – 31.0
Polarization ConfigurationRHCP or LHCP configurableCircular, optional linear
Gain (mid-band)43.3 dBi44.1 dBi51.9 dBi55.1 dBi
-3dB Beamwidth (mid-band)1.1°1.0°0.4°0.3°
Radiation Pattern ComplianceMIL-STD-188-164AFCC 25.209, MIL-STD-188-164A
EIRP 56.8 dBW w/ 22.4W BUC 65.0 dBW w/ 25W BUC
G/T with LNB, midband, clear
horizon
22.4 dB/°K (55° LNB) 28.2 dB/°K (120° LNB) 
Antenna noise temperature, midband, 20° el53°K 104°K 
Axial Ratio, within pointing cone1.21 dB2 dB1.5 dB 1 dB
Feed Port Isolation (Tx to Rx)100 dB incl. opt. filter100 dB incl. opt. filter80 dB85 dB incl. opt. filter

The antenna control system is embedded on the antenna with a built-in compass, GPS and tilt compensation. The auto-acquisition controller is ethernet based, modem agnostic, OpenAMIP compliant, up-to-date with the latest cybersecurity, and operates with a web-based user interface that can be used on a phone, laptop or PC. The controller includes a satellite profile management system, a built-in carrier/beacon receiver with an optional rack-mount interface panel or outdoor rated power supply and offers intelligent tracking and multi-orbit capabilities. Power requirements vary by antenna.

  • Spare parts available

*Specifications subject to change without notice.