GEO FLYAWAY ANTENNAS & TERMINALS

2.4m Tri-Band Ultra-Lightweight Manual FlyAway Terminal

AvL’s 2.4m axi-symmetric manual terminal is ultra-lightweight and has a small two-case pack-up. The 14-piece carbon fiber reflector is designed to operate in X, Ku and Ka-band with new bayonet-style feeds and quick-change RF kits. A C-band capability is in the planning as an upgrade kit. The antenna is modular and flexible with numerous BUC and LNB options, and it supports RF or modem peaking. This manual operation antenna functions on an aluminum space frame, which enables set-up or pack-up by one person in minutes. Once the antenna is set-up and anchored, the antenna is easily repositioned using simple, ergonomic pointing assist features – no anchor adjustments needed – for fine tuning to one satellite or pointing to a different satellite.

KEY FEATURES
  • The most compact 2.4m antenna on the market
  • Offers performance specifications comparable to larger lightweight antennas with small pack-up
  • Packs into two checkable transit cases with each weighing less than 100 lbs.
  • High-stiffness, ultra-lightweight 14-piece carbon fiber reflector with a 6-piece hub
  • High-stiffness, ultra-lightweight positioner base
  • Assembles in <15 minutes
  • Durable sand feet with levelling mechanism
  • RF package with the BUC located behind the hub, which makes it highly configurable
  • Standard 2-port Precision Ku-band feed (standard cross-pol comp.)
  • Points with AvL computer assisted pointing tool
  • Intuitive coarse/fine Az/El positioning after anchoring
  • Simple feed polarization positioning
Reflector constructionSegmented, carbon-fiber composite
Axis travel
          Polarization, LP feeds
          Azimuth
          Elevation
                       
+/- 95°
Fine +/- 10°
Coarse +70° – 90°, fine +/- 5°

RF interface
          Tx – BUC

          Rx – LNB

                         
Waveguide flange at Tx feed port, contact AvL Sales for specific flange interface options
Directly mounted to feed Rx port, contact AvL Sales for specific flange interface options
Power requirementsOnly power consumption by BUC, LNB & modem
Pack-up size & weight
          Case 1: 9-piece reflector
          Case 2: El over Az positioner
          Case 3: feed or multiple feeds
                       
43”L x 42”W x 24”D (109L x 106W x 61D cm); weighs <170 lbs. (<79 kg) packed
45”L x 16”W x 13”D (114L x 41W x 33D cm); weighs <80 lbs (<36 kg) packed
Dependent on number of feeds

Wind – survival, anchored

60 mph (97 kph) in stowed position (90º elevation)

Wind – operational, any look angle
          Without anchoring
          With anchoring

                          
15 mph (24 kph)
30 gusting to 45 mph (48 gusting to 72 kph)

Pointing loss in operational wind, Ku-band Rx
          20 mph (32 kph)
          30 gusting to 45 mph (48 gusting to
          72 kph)

                       
0.2 dB typical 
1.2 dB typical

Temperature – operational

-26°F to 131°F (-32°C to 55°C)

Temperature – storage

-40°F to 140°F (-40°C to 60°C)

 Std. 2-Port Ku-Band ReceiveStd. 2-Port Ku-Band TransmitOpt. 2-Port Ka-Band ReceiveOpt. 2-Port Ka-Band Transmit
Frequency Range (GHz)10.95 – 12.7513.75 – 14.519.2 – 21.229.0 – 31.0
Polarization ConfigurationLP/orthogonal standard, optional LP/co-polCP orthogonal standard
Gain (mid-band)46.5 dBi48.5 dBi51.2 dBi54.2 dBi
-3dB Beamwidth (mid-band)0.8°0.6°0.4°0.3°
Radiation Pattern ComplianceFCC 25.209, ITU-R S.580-6, IEss 208FCC 25.209, MIL-STD-188-164A
EIRP 63.7 dBW w/ 34.6W linear BUC 65.8 dBW w/ 16W
linear BUC
G/T with LNB, midband, clear
horizon
25.5 dB/°K with 50° LNB 27.7 dB/°K with 100° LNB 
Cross-pol isolation> 30 dB > 21.3 dB> 24.8 dB
Feed Port Isolation (Tx to Rx)35 dB80 dB including filter80 dB80 dB including filter

This antenna is manually operated. Optional pointing with AvL computer assisted pointing tool.

  • 2-port Ku-band Mode-Match feed (LP) (enhanced cross-pol comp.)
  • 2-port Ka-band commercial (CP or LP)
  • 2-port Ka-band MIL feed (CP or LP) (WGS)
  • 2-port Ka-band wideband feed (CP) (WGS and commercial)
  • 2-port X-band MIL feed (CP) (WGS) with optional Rx/Tx reject filter kit

*Specifications subject to change without notice.