MULTI-BAND & MULTI-ORBIT ANTENNAS & TERMINALS

1.35m XY GEO-MEO-LEO-HEO Tracking Antenna

AvL’s 1.35m XY Band-Configurable GEO-MEO-LEO-HEO Tracking Antenna is transportable and features tool-less assembly and rapid set-up. The antenna operates with an XY positioner to eliminate overhead pass keyhole and its uniquely shaped optics enable high G/T. The carbon fiber reflector is segmented for compact pack-up and the integral base is a non-penetrating tripod. The antenna operates in X-, Ku- or Ka-band with AvL’s antenna control system embedded in the base positioner

KEY FEATURES
  • Portable multi-orbit GEO-MEO-LEO-HEO tracking antenna
  • Ultra-rugged construction
  • AvL carbon fiber reflector manufacturing technology
  • Segmented carbon fiber reflector allowing three case pack-up
  • Less than 15 minute total set-up & satellite acquisition
  • Durable sand feet
  • Accurate/reliable antenna beam pointing via AvL antenna control system
  • Auto acquisition and tracking utilizing TLE, internal beacon tracking receiver or external control interface (API)
  • Full hemispherical coverage positioner eliminates overhead keyhole
  • Rapidly interchangeable X-CP, Ku-CP and Ka-CP RF packages
  • Optional Ku-LP RF package
  • Customized frequency bands
  • Engineered mounting of customer-provided equipment
Reflector constructionSegmented, carbon-fiber composite
OpticsAxi-symmetric ring focus splash plate
Axis travelX +/- 90°, Y +/- 90°
El travel
          On level ground
          On max grade
               
0°-90° with full hemispherical coverage
8°-90°
Axis speed – slewing/positioning12° / second
Electrical interfacePower, ethernet and coax (Rx & Tx)
RF interfaceCoax inputs at user interface or 2x WR42 & 2x WR28 interfaces at OMT
Deployed weight 100 pounds (45.4 kg)
Packed weight 3 checkable cases, each weighs <70 pounds (<31.8 kg)
Level requirementsDeployed on <8° slope, no leveling feet required
Power requirements115/230 VAC single phase, 250W excluding BUC

Wind – survival, anchored

60 mph (96 kph) in 90° elevation stowed position

Wind – operational with anchoring

30 mph (48 kph) gusting to 45 mph (72 kph)

Wind – operational without anchoring

15 mph (24 kph)

Loss in max wind

2dB typical

Pointing loss in max operational wind

1dB typical at Ka Rx

Temperature – operational

-22F to 125F (-30C to 52C)

Temperature – storage

-4°F to 140°F (-20°C to 60°C)

 Water / Dust

IP65

 mPOWER Ka RxmPOWER Ka TxStd 2-Port X-Band RxStd 2-Port X-Band Tx
Frequency Range (GHz)17.7 – 20.227.5 – 30.07.25 – 7.757.9 – 8.4
Polarization ConfigurationRHCP and/or LHCPSwappable RHCP or LHCP
Gain (mid-band)46.5 dBi49.3 dBi38.7 dBi39.1 dBi
-3dB Beamwidth (mid-band)0.8°0.5°2.2°2.0°
Radiation Pattern ComplianceFCC 25.209, ITU-R S.580-6,
MIL-STD-188-164C
MIL-STD-188-164C
EIRP   X-band SSPA 44.6W linear: 55.5 dBW
G/T, clear horizon, 23˚C22.6 dB/°K @ 20° Elevation 16.8 dB/°K @ 10° El
17.3 dB/°K @ 20° El
 
Axial ratio CP only, within pointing cone1.5 dB1.0 dB2.0 dB2.0 dB
Feed port isolation (Tx to Rx)>85 dB>85 dB with filter100 dB incl. opt. filter100 dB incl. opt. filter

The AvL antenna control system is embedded on the antenna with a built-in compass, GPS and tilt compensation. The auto-acquisition controller is ethernet based, modem agnostic, OpenAMIP compliant, up-to-date with the latest cybersecurity, and operates with a web-based user interface that can be used on a phone, laptop or PC. The controller includes a satellite profile management system, a built-in AvL carrier/beacon receiver with an optional rack-mount interface panel or outdoor rated power supply and offers intelligent tracking and multi-orbit capabilities. Power requirements vary by antenna.

  • Custom BUC/HPA integration
  • Embedded or external receiver options
  • Sandbag/anchor kit

*Specifications subject to change without notice.