The AvL 1.0m Model 1010 SNG/Commercial Vehicle-Mount antenna is a GEO antenna that’s upgradable to MEO operation. The antenna operates in Ku-band and is Ka-band ready, and the antenna can be configured for vehicle-mount,
Reflector construction | 1.0m single piece carbon-fiber |
Az / El drive | Motorized AvL Cable Drive with zero backlash |
Polarization drive system | Motorized worm gear drive (standard) |
Axis travel | |
Azimuth speed slewing/deploying (typical) | 2°/second |
Elevation speed slewing/deploying (typical) | 2°/second |
Az / El speed peaking (typical) | 0.2°/second |
Motors | 24 VDC variable speed, constant torque |
RF Interface BUC/HPA mounting Axis transition | Feed boom (30 lbs.; max. BUC envelope: 15 L x 11.5 W x 6 H inches (38 L x 29 W x 15 H cm)), Azimuth base plate saddlebag Cover flange at interface point Feed boom RG59 run from feed to base plus 25 ft (8m) |
Electrical interface | One 25 ft (8m) cable with connectors for controller |
Manual / emergency drive | Hand crank on Az, El, Pol |
Weight (approximate) | 110 – 145 lbs. (50 – 66 kg) depending on options selected |
Stowed dimensions | 61.5 L x 40 W x 13.5 H inches (156 L x 100 W x 35 H cm) |
Wind – survival | Deployed: 75 mph (121 kph); stowed: 100 mph (161 kph) |
Wind – operational | 30 mph (48 kph), gusts to 45 mph (72 kph) |
Pointing loss in wind (Ku Rx) | |
Temperature | |
Std 2-Port Ku-band Receive | Std 2-Port Ku-band Transmit | 2-Port Ka-band Receive | 2-Port Ka-band Transmit | |
Frequency Range (GHz) | 10.95 – 12.75 | 13.75 – 14.5 | 18.3 – 20.2 | 28.1 – 30.0 |
Polarization Configuration | Linear orthogonal standard, optional co-pol | Circular | ||
Gain (mid-band) | 40.0 dBi | 41.5 dBi | 44.6 dBi MIL | 47.9 dBi MIL |
-3dB Beamwidth (mid-band) | 1.8° | 1.5° | 1.0° | 0.7° |
Radiation Pattern Compliance | FCC 25.209, ITU-R S.580-6, IESS 208 | FCC 25.209, MIL-STD-188-164A | ||
Antenna noise temp, mid-band or GHz, 20° el | 54° K | 107° K | ||
Power handling capability | 1 KW per port | 250 W per port | ||
G/T (dB/°K) with LNB, @ mid-band, clear horizon | 19.6 dB/°K with 50° LNB | 21.1 dB/°K with 100° LNB | ||
Axial ratio, CP only, within pointing cone (dB) | 1.5 | 1.0 | ||
Cross-pol isolation – on axis | 35 dB | 35 dB | ||
Cross-pol isolation – within pointing cone | 28 dB | 30 dB | ||
Feed port isolation – Tx to Rx | 35 dB | 80 dB including filter | 85 dB | 85 dB including filter |
The AvL antenna control system is embedded on the antenna with a built-in compass, GPS and tilt compensation. The auto-acquisition controller is ethernet based, modem agnostic, OpenAMIP compliant, up-to-date with the latest cybersecurity, and operates with a web-based user interface that can be used on a phone, laptop or PC. The controller includes a satellite profile management system, a built-in AvL carrier/beacon receiver with an optional rack-mount interface panel or outdoor rated power supply and offers intelligent tracking and multi-orbit capabilities. Power requirements vary by antenna.
*Specifications subject to change without notice.
15 North Merrimon Avenue
Asheville, NC 28804
Phone: 828-250-9950