GEO FLYAWAY ANTENNAS & TERMINALS

75cm - 98cm Terminal Ultralight Manual Expandable FlyAway Terminal

The newly enhanced 75cm Model 0715 Ultra-Light Manual Expandable FlyAway Terminal is upgradeable to a 98cm 0915 ultra-lightweight manual point flyaway. The terminal includes a rugged and sturdy positioner and folding tripod with coarse and fine adjustments and easy-to-read scales for Az/El/Pol adjustments. The six-piece 75cm reflector is optimized for a tri-band terminal with X-, Ku, and Ka-band RF kits that snap into place with no tools or adjustment needed. Band changes can be accomplished in less than one minute. The hub, reflector segments, and feed can quickly be replaced to upgrade the system to a 98cm tri-band terminal. The terminal packs into one or two IATA-compliant cases including ancillary equipment.

KEY FEATURES
  • 75cm 6-piece / 98cm 8-piece AvL carbon fiber reflector with an aluminum hub
  • Lightweight manual antenna with integral base and folding tripod
  • Unique elevation, azimuth and polarization positioner
  • Packs in 1 or 2 airline checkable cases (configuration dependent)
  • <5 minutes for 75cm or <10 minutes for the 98cm
  • 2-port Ku-band precision feed
  • Optional feeds: 2-port X-band, 2-port Ka-band wideband
  • Manual point assist tools
  • MIL-STD-188-164C compliant
Reflector constructionSegmented carbon-fiber with an aluminum hub
Axis travel
          Azimuth
          Elevation (reflector boresight)
          Polarization
               
360° continuous
+5 to 95°
+/- 95°
RF interface
          BUC / LNB mounting
          RF connections
               
Rear of reflector
Coax connectors
Electrical interface24V, 48V or wideband power input with Ethernet M&C
Set-up time

<5 minutes for 75cm or <10 minutes for the 98cm

Assembled weight75cm: <30 lbs (<14 kg), 98cm: <35 lbs (<16 kg)
Pack-up

75cm single case or backpack
98cm 2 cases or backpacks with side pack

Wind – survival, anchored

45 mph (72 kph)

Wind – operational with anchoring

30 mph (48 kph) gusting to 45 mph (72 kph)

Wind – operational without anchoring

15 mph (24 kph)

Loss in max wind – Ka-band receive

1dB typical, 2dB max

Temperature – operational

-25F to 125F (-32C to 52C)

Temperature – Storage

-40°F to 140°F (-20°C to 60°C)

 Std 2-Port Ku-Band RxStd 2-Port Ku-Band TxStd 2-Port Ka-Band RxStd 2-Port Ka-Band Tx
Frequency range (GHz)10.95 – 12.7513.75 – 14.520.2 – 21.230.0 – 31.0
Polarization configurationlinear orthogonal std, optional co-polCircular, optional linear feed
75cm gain (mid-band)37.9 dBi39.2 dBi42.2 dBi45.5 dBi
98cm gain (mid-band)39.7 dBi40.0 dBi44.5 dBi47.2 dBi
-3dB beamwidth (mid-band)2.4°2.0°1.4°0.9°
Radiation pattern complianceFCC 25.209 outside main beam, ITU-R S.580-6,
IESS 208
FCC 25.209, MIL-STD-188-164C
EIRP SSPA 8W linear: 47.9/49.8 dBW
SSPA 16W linear: 50.9/52.8 dBW
 SSPA 12.6W linear: 55.8/57.5 dBW
Power handling capability 75W 50W
75cm G/T, mid-band, clear horizon, 20° El15.8 dB/°K w/ 50° LNB
 18.2 dB/°K w/ 100° LNB 
98cm G/T, mid-band, clear horizon, 20° El18.5 dB/°K w/ 50° LNB 20.5 dB/°K w/ 100° LNB 
Axial ratio CP only, within pointing cone  1.5 dB1.0 dB
Cross-pol isolation
          On-axis minimum
          Within pointing cone
         
35 dB
35 dB
         
35 dB
35 dB
  
Feed port isolation (Tx to Rx)35 dB80 dB incl. filter80 dB80 dB incl. incl. filter

Terminal is manually operated. Pointing assist tool available.

  • Customer-furnished ODU/modem integration
  • Customer-furnished BUC/LNB integration
  • Computer assisted manual pointing tools
  • High stability 10MHz timing reference
  • Wind anchoring options: ground stakes or sandbags
  • Optional soft sided ballistic nylon cases
  • Additional feed band cases
  • Add custom logo on reflector face (1- or 2-color, per AvL logo policy)
  • Spare parts kit

*Specifications subject to change without notice.